What Is PSM (Process Safety Management)?
Process safety management is a framework for preventing fires, explosions and toxic releases in facilities that handle hazardous chemicals.
Process safety focuses on preventing major accidents, such as fires, explosions and toxic releases, in facilities that process or store hazardous substances. Process safety management (PSM) is the system used to achieve this.
Process Safety vs Personal Safety
- Personal safety deals with everyday hazards such as slips, trips and falls
- Process safety deals with low frequency, high consequence events involving hazardous processes
A good personal safety record does not guarantee good process safety, as several major accidents have shown.
Typical Elements of PSM
The US OSHA PSM standard (29 CFR 1910.119) defines 14 elements, which are widely used as a reference:
- Employee participation
- Process safety information
- Process hazard analysis, such as HAZOP
- Operating procedures
- Training
- Contractors
- Pre start up safety review
- Mechanical integrity
- Hot work permits
- Management of change
- Incident investigation
- Emergency planning and response
- Compliance audits
- Trade secrets
The Role of Maintenance
Mechanical integrity is central to process safety. Inspection, testing and preventive maintenance of pressure equipment, relief devices and safety instrumented systems must be planned, completed and documented reliably.
See how Oriens puts PSM into practice.
Explore Oriens Risk ManagementRelated Terms
Management of Change (MOC)
Management of change is a process for reviewing and approving changes to equipment, processes, people or procedures so new risks are controlled.
Hazard Identification (HAZID)
Hazard identification is the process of finding anything with the potential to cause harm, such as energy, chemicals, equipment or working conditions.
Permit to Work (PTW)
A permit to work is a formal written system that controls hazardous work, confirming hazards are assessed and precautions are in place before work begins.
Emergency Response Plan
An emergency response plan sets out how an organisation will respond to emergencies such as fires, chemical releases, injuries or natural disasters.
Risk Assessment
A risk assessment identifies hazards, evaluates how likely and severe the harm could be, and decides what controls are needed to reduce the risk.
Ready to modernise your asset management?
See how Oriens EAM and Oriens HSE bring maintenance, assets and safety together on one platform.
Request a Free Demo