What Is PTW (Permit to Work)?
A permit to work is a formal written system that controls hazardous work, confirming hazards are assessed and precautions are in place before work begins.
A permit to work (PTW) is a documented system used to control work that has been identified as potentially hazardous. It is a core part of a safe system of work in industries such as oil and gas, chemicals, power, mining and manufacturing.
What a Permit to Work Confirms
- The work and its location are clearly defined
- Hazards have been identified and assessed
- Precautions such as isolations, gas tests and barriers are in place
- The people doing the work are competent and authorised
- Everyone affected knows the work is taking place
- The area is made safe before the permit is closed
Common Permit Types
- Hot work
- Cold work
- Confined space entry
- Electrical work
- Working at height
- Excavation
- Lifting operations
- Radiation work
The Permit Lifecycle
- Request and planning
- Risk assessment
- Approval by authorised persons
- Issue and on site verification
- Monitoring, suspension or extension
- Shift handover where needed
- Closure and return to service
Paper vs Digital Permits
Paper permits can be lost, are hard to track and make it difficult to see conflicts between jobs. A digital permit to work system (ePTW) enforces each step, shows all active permits in real time and keeps a complete audit trail.
See how Oriens puts PTW into practice.
Explore Oriens e-PTWRelated Terms
Lockout Tagout (LOTO)
Lockout tagout is a safety procedure that isolates energy sources and locks them off so equipment cannot be started while work is being done.
Hot Work
Hot work is any task that produces heat, sparks or flame, such as welding, cutting or grinding, and can ignite flammable materials.
Confined Space Entry
Confined space entry is work inside an enclosed space, such as a tank or vessel, where hazards like toxic gases or low oxygen may be present.
Simultaneous Operations (SIMOPS)
SIMOPS are two or more activities taking place at the same time and location, where they could interact and create additional hazards.
Job Safety Analysis (JSA)
A JSA breaks a task into steps, identifies the hazards in each step and defines the controls needed to do the job safely.
Further Reading
Ready to modernise your asset management?
See how Oriens EAM and Oriens HSE bring maintenance, assets and safety together on one platform.
Request a Free Demo