Skip to main content
HSE & Safety

Digital Permit to Work System: How Oriens e-PTW Makes High Risk Work Safer

See how a digital permit to work system like Oriens e-PTW removes paper permits, speeds approvals and keeps high risk work safe and fully auditable.

25 October 2026 5 min read
Oriens e-PTW digital permit to work dashboard showing active permits on a tablet
Back to all articles

Confined space entry, electrical isolation, working at height and excavation are part of everyday operations in most industrial facilities. They are also the jobs where a single missed step can lead to serious injury, equipment damage or an unplanned shutdown.

The permit to work (PTW) process exists to control these risks. But when permits live on paper, safety depends on handwriting, physical signatures and memory. Here is why paper falls short, and how Oriens e-PTW makes high risk work safer, faster and fully auditable.

What Is a Digital Permit to Work System?

A permit to work system is a formal process for controlling hazardous work. It confirms that hazards are assessed, isolations are in place, the right people are authorised and the area is made safe before the job is closed.

A digital permit to work system, also called an electronic permit to work or ePTW, moves this entire process onto software that can be used from a computer, tablet or mobile phone.

Why Paper Permits Put Your Operation at Risk

  • Lost or incomplete permits reach the worksite missing critical approvals.
  • Approval bottlenecks occur when one absent signatory holds up work for hours.
  • No real time visibility of which permits and isolations are active.
  • Missed closures mean equipment can be re-energised before every worker has signed off.
  • Audit trail gaps make incident investigations and regulatory reporting difficult.
  • Inconsistent enforcement lets high risk tasks go ahead without the right precautions.

How Oriens e-PTW Adds Value

Fully Paperless Permits From Any Device

Create structured permits for confined space entry, electrical isolation, working at height, cold work, excavation, radiation work and more. Configurable templates let you build custom permit types for your own operation.

Approvals in Minutes, Not Hours

Set up approval chains for each permit type, such as Supervisor, Area Owner and HSE Officer. Approvers are notified instantly and sign off from their mobile device. Routing by area, role or risk level sends every permit to the right people automatically.

Built In Lockout Tagout (LOTO)

Isolation registers are managed inside the permit itself. Every isolation point, responsible person and reinstatement status is tracked, so there is no separate LOTO log to cross check.

A Live View of Every Permit

The real time dashboard shows all active, pending and overdue permits across your sites. Automatic alerts flag approaching expiry and overruns, and conflict detection warns you when two jobs should not run in the same area at the same time.

Safe, Structured Closure

A permit cannot be closed until all isolations are reinstated, the area is cleared and every worker has signed off. A final closure record is generated automatically.

Audit Ready, Always

Every creation, approval, extension and closure is timestamped and attributed to a user. The full history of any permit is available in seconds. Oriens e-PTW is designed to support DOSH, OSHA and ISO 45001 permit control requirements.

Works Offline

The Oriens HSE mobile app lets teams create, review and approve permits at remote or offshore sites without a connection. Data syncs automatically once the device reconnects.

Standalone or Fully Integrated

Standalone: Oriens e-PTW runs alongside your existing CMMS, ERP or legacy systems through an open REST API, with SSO and Active Directory support. A typical deployment goes live in 3 to 4 weeks.

Integrated with Oriens EAM and HSE: permits are raised directly from work orders, isolation points come from the asset register, permit overruns automatically create incident records and hazard areas are pre-loaded from Oriens Risk Assessment. No duplicate data entry, and maintenance and safety work as one. Learn more in our EAM overview.

Built for High Risk Industries

Oriens e-PTW supports demanding sectors including oil and gas, power and utilities, chemicals and pharmaceuticals, marine and offshore, mining and manufacturing.

Frequently Asked Questions

What permit types does Oriens e-PTW support?

Cold work, confined space entry, electrical isolation, working at height, excavation and radiation permits, plus custom templates. Hot work is managed through the Oriens Certificates module.

Do we need to replace our current CMMS or ERP?

No. Oriens e-PTW can run standalone and connect to your existing systems through a REST API.

How long does implementation take?

A standalone deployment typically takes 3 to 4 weeks. Projects that integrate with existing systems usually take 6 to 8 weeks.

See Oriens e-PTW in Action

Paper permits leave too much to chance. Oriens e-PTW gives you enforced workflows, live visibility and a complete audit trail, so every high risk job is planned, approved and closed safely.

Explore the Oriens e-PTW Permit to Work module or contact our team to book a free demo.

Topics:HSE & Safety

Key terms in this article

Ready to modernise your asset management?

See how Oriens EAM can reduce downtime, cut maintenance costs, and give you full visibility over your assets.

Request a Free Demo