What Is LOTO (Lockout Tagout)?
Lockout tagout is a safety procedure that isolates energy sources and locks them off so equipment cannot be started while work is being done.
Lockout tagout (LOTO) protects workers from the unexpected start up of machinery or release of stored energy during maintenance and servicing. It is also known as isolation management or control of hazardous energy.
Types of Hazardous Energy
- Electrical
- Mechanical, including moving parts and springs
- Hydraulic and pneumatic pressure
- Thermal, such as steam or hot surfaces
- Chemical
- Gravity, such as suspended loads
Typical LOTO Steps
- Prepare: identify all energy sources and isolation points
- Notify: inform affected people that the equipment will be isolated
- Shut down: stop the equipment using normal procedures
- Isolate: operate isolation devices such as breakers and valves
- Lock and tag: each worker applies a personal lock and tag
- Release stored energy: bleed, vent, block or discharge
- Verify: try to start the equipment to confirm it is safe (often called "try out")
- Work, then restore: remove locks only when work is complete and the area is clear
LOTO and Permit to Work
On many sites, isolations are managed as part of the permit to work. Linking the isolation register to each permit ensures that every isolation point is applied, verified and removed in a controlled way.
Regulations
Many jurisdictions regulate the control of hazardous energy. In the United States, for example, OSHA standard 29 CFR 1910.147 covers lockout tagout.
See how Oriens puts LOTO into practice.
Explore Oriens e-PTWRelated Terms
Permit to Work (PTW)
A permit to work is a formal written system that controls hazardous work, confirming hazards are assessed and precautions are in place before work begins.
Confined Space Entry
Confined space entry is work inside an enclosed space, such as a tank or vessel, where hazards like toxic gases or low oxygen may be present.
Hierarchy of Controls
The hierarchy of controls ranks ways to reduce risk from most to least effective: elimination, substitution, engineering, administrative controls and PPE.
Simultaneous Operations (SIMOPS)
SIMOPS are two or more activities taking place at the same time and location, where they could interact and create additional hazards.
Further Reading
Ready to modernise your asset management?
See how Oriens EAM and Oriens HSE bring maintenance, assets and safety together on one platform.
Request a Free Demo