What Is Risk Assessment?
A risk assessment identifies hazards, evaluates how likely and severe the harm could be, and decides what controls are needed to reduce the risk.
Risk assessment is the foundation of health and safety management. It is a systematic look at what could cause harm and whether enough is being done to prevent it.
The Five Steps of Risk Assessment
- Identify the hazards
- Decide who might be harmed and how
- Evaluate the risk and decide on controls
- Record the findings and implement the controls
- Review the assessment regularly and after any significant change
Evaluating Risk
Risk is usually assessed by combining:
- Likelihood: how probable it is that harm will occur
- Severity: how serious the harm would be
These are often plotted on a risk matrix, giving a risk rating such as low, medium, high or extreme. Controls are then selected to reduce the risk to an acceptable level, and the residual risk is assessed again.
Types of Risk Assessment
- Workplace and task risk assessments
- Job safety analysis (JSA)
- Hazard identification studies (HAZID)
- Hazard and operability studies (HAZOP)
- Chemical, noise and manual handling assessments
Keeping Assessments Alive
Risk assessments lose value if they sit in a folder. Linking them to permits, procedures and inspections keeps them in use and up to date.
See how Oriens puts Risk Assessment into practice.
Explore Oriens Risk ManagementRelated Terms
Hazard Identification (HAZID)
Hazard identification is the process of finding anything with the potential to cause harm, such as energy, chemicals, equipment or working conditions.
Job Safety Analysis (JSA)
A JSA breaks a task into steps, identifies the hazards in each step and defines the controls needed to do the job safely.
Hierarchy of Controls
The hierarchy of controls ranks ways to reduce risk from most to least effective: elimination, substitution, engineering, administrative controls and PPE.
Failure Mode and Effects Analysis (FMEA)
FMEA is a systematic method for identifying how equipment or processes can fail, the effects of each failure and how to reduce the risk.
Process Safety Management (PSM)
Process safety management is a framework for preventing fires, explosions and toxic releases in facilities that handle hazardous chemicals.
Ready to modernise your asset management?
See how Oriens EAM and Oriens HSE bring maintenance, assets and safety together on one platform.
Request a Free Demo