What Is Corrective Maintenance?
Corrective maintenance restores equipment to working condition after a fault or failure has been found, whether planned or carried out urgently.
Corrective maintenance is any maintenance done to fix a problem that has already been identified. The problem may have been found during an inspection, flagged by a sensor or discovered when the equipment broke down.
Planned vs Unplanned Corrective Maintenance
- Planned corrective maintenance: a defect is found, for example during a PM inspection, and the repair is planned and scheduled before it causes a failure.
- Unplanned (emergency) corrective maintenance: the equipment has failed and must be fixed urgently. This is often called reactive or breakdown maintenance.
Planned corrective work is usually far cheaper and safer than emergency work, because parts, people and permits can be prepared in advance.
Reducing the Need for Corrective Maintenance
- Strong preventive and predictive maintenance programmes
- Root cause analysis of repeat failures
- Better operating practices and training
- Design improvements for problem equipment
Tracking corrective work orders in a CMMS shows where failures happen most often and helps target improvement efforts.
See how Oriens puts Corrective Maintenance into practice.
Explore Oriens Work Order ManagementRelated Terms
Reactive Maintenance
Reactive maintenance, or breakdown maintenance, means repairing equipment only after it fails, without prior planning.
Preventive Maintenance (PM)
Preventive maintenance is planned maintenance carried out at set intervals or usage levels to reduce the chance of equipment failure.
Work Order
A work order is a document, usually digital, that authorises and describes a maintenance task, including what to do, who does it, when and with which parts.
Mean Time to Repair (MTTR)
MTTR is the average time taken to repair a failed asset and return it to service. A lower MTTR means faster recovery from failures.
Root Cause Analysis (RCA)
Root cause analysis is a structured method for finding the underlying causes of a failure or incident, so it can be prevented from happening again.
Ready to modernise your asset management?
See how Oriens EAM and Oriens HSE bring maintenance, assets and safety together on one platform.
Request a Free Demo