What Is Condition Monitoring?
Condition monitoring is the measurement of parameters such as vibration, temperature or oil quality to detect changes that signal developing faults.
Condition monitoring tracks the health of equipment while it is running. It provides the data that drives condition based and predictive maintenance.
Common Condition Monitoring Techniques
- Vibration analysis: detects imbalance, misalignment, looseness and bearing wear in rotating equipment
- Infrared thermography: finds hot spots in electrical panels, motors and steam systems
- Oil analysis: reveals wear metals, contamination and lubricant breakdown
- Ultrasonic testing: detects leaks, electrical discharge and early bearing faults
- Motor current analysis: identifies electrical and mechanical motor problems
- Process parameters: pressure, flow, temperature and power from control systems
Online vs Periodic Monitoring
- Online monitoring uses permanently installed sensors and provides continuous data. It suits critical assets.
- Periodic monitoring uses portable instruments on routes at set intervals. It suits a larger number of less critical assets.
Making Condition Monitoring Effective
The value of condition monitoring comes from acting on the data. Alarms and trends should feed directly into your CMMS or EAM system, so that a developing fault creates a work order before it becomes a failure.
See how Oriens puts Condition Monitoring into practice.
Explore Oriens IIoT IntegrationRelated Terms
Predictive Maintenance (PdM)
Predictive maintenance uses condition data and analytics to predict when equipment is likely to fail, so maintenance is done just before it is needed.
Condition Based Maintenance (CBM)
Condition based maintenance triggers work when monitored indicators, such as vibration or temperature, show that an asset's condition is deteriorating.
P-F Curve
The P-F curve shows how an asset's condition declines from the point a potential failure can be detected (P) to functional failure (F).
Industrial Internet of Things (IIoT)
IIoT connects industrial sensors, machines and systems to the internet so their data can be collected, analysed and acted on in real time.
Supervisory Control and Data Acquisition (SCADA)
SCADA is a control system that monitors and controls industrial processes and equipment, often across large or remote sites, in real time.
Ready to modernise your asset management?
See how Oriens EAM and Oriens HSE bring maintenance, assets and safety together on one platform.
Request a Free Demo